* FlashMLA - it finally works (on the CPU)
* FlashMLA: allow for f16 and bf16 cache in addition to q8_0
* It works with ggml FA, not with iqk FA
* WIP
* FlashMLA: it now works with iqk
I had forgotten to divide the Q stride by sizeof(float) and
that's why, very cobfusingly, it was working for TG but not for PP.
* WIP
* FlashMLA: that should be it for now
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* A better way to measure the cost of ggml_barrier
* Smart expert selection
* Add ser option to llama-bench
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* This reduces compute buffer size for MLA
* This should accomplish it for standard attention
* Much better
* Better concat for contiguous tensors
If all the op does is to concatenate the second tensor
to the first, why would we want to have a loop?
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
The `-mla` command line option turns into an int from a bool.
mla = 0: use standard attention
mla = 1: use MLA with transposed cache
mla > 1: use MLA without transposed cache
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Slight MLA TG performance improvement on CUDA
The low MLA performance on CUDA is dues to
the wk_b * q_nope operation.
It turns into n_head matrix multiplications with
n_head separate quantization and GEMV steps.
The associated overhead is just too much for TG
where each GEMV is very fast (512 x 128 = 131 KFLOP
for DeepSeek-Lite, 4X that for DeepSeekV3/R1).
The way it was done there was also a copy of each q_nope
row before quantization, which I have now eliminated.
This results in a ~2.5% speedup.
What needs to happen instead is to launch a single
computation that quantizes all heads, and then have
a kernel that does the GEMV for all heads instead of
n_head sequential GEMVs.
* Slightly better
* CUDA: Quantize non-contiguous tensors
* Much better MLA
It is a total hack, but it works.
* Cleanup
Remove duplicated gemv's.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Give the user the option to override where model weights are stored
* Fix ggml_nbytes() problem and cleanup
For a tensor with zero elements ggml_nbytes() was returning
uint64_t::max, and this was causing graph allocation failure.
* Add timing info to CUDA graph evaluation
* Add more timing info
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Fusing MoE up * unary(gate)
* Fusing MoE up * unary(gate): CUDA
We get ~13% speedup for PP-512 and ~2% for TG-128
for DeepSeek-Lite
* On CUDA also fuse MoE down * (up * unary(gate))
in case the MUL_MAT_ID op for the down experts is the next
op in the graph.
* Command line option to enable fused MoE up*unary(gate)
* Add fmoe option to llama-bench
* Adding forgotten gelu, relu, silu on ARM
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* This seems to be a better way
to do the attention matrix multiplications in the TG case.
* Cleanup
* Fuse up and gate gemms in MoE models
Small (~1-2%) but measurable performan ce gain
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* This seems to be a better way
to do the attention matrix multiplications in the TG case.
* Cleanup
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding q8_KV - Basics + AVX2 gemm/gemv
* q8_KV: Better AVX2 gemm
* q8_KV: Better Zen4 gemm
We get 225.7 t/s for L3-8B. In comparison q8_0 without
run-tinme-repacking is at 169 t/s.
* q8_KV: AVX2 gemm/gemv
We get 254 t/s for L3-8B vs 194 t/s for q8_0 without rtr.
* q8_KV: be able to use it for K cache
This required quite a few fixes in ggml and llama.cpp:
* ggml: do not calculate row size as n/block_size*type_size. I had
removed most of it when implementing the quants with per row scale,
bit it was stull lurking in ggml_copy. Not sure if these were the last
remnants of ggmil-style row sizes, or if there are still places left
* llama.cpp: get rid of the the 1d K cache assumption. Create and manage
the K-cache as a 2D tensor so we can have per row meta data as needed
by q8_KV.
Using q8_KV for K-cache results in non-negligible performance gains.
More details to follow, but for DeepSeek-Lite with MLA, we get
18% speedup for PP-8192 compared to q8_0 K-cache.
* q8_KV: be able to use it for K cache in FA
* q8_KV: repack it for K*Q in FA
* q8_KV: slightly faster gemv on Zen4
* q8_KV: slightly faster gemv on Zen4
* q8_KV: ARM_NEON
We get PP-512 = 167 t/s for L3-8B without interleaving!
We do the interleaving on the fly, so I wonder if this
could be done for other quants as well.
* q8_KV: use it in FA on NEON
* q8_KV_r8 - repacked q8_KV
On Zen4 it is slower than q8_k_r8 (292 vs 370 t/s)
This makes no sense whatsoever as the q8_KV_r8 GEMM is
basically the q8_k_r8 GEMM with the unnecessary block stuff
removed (so, one would think that it would be faster).
* q8_KV_r8: don't use nrc_y = 16 on Zen4
This is faster - 350 t/s. Why?
Much better than the 290 t/s we had before, but still slower
than the 370 t/s for q8_k_r8.
* q8_KV: nrc_y = 16 also doesn't pay off in FA
* Minor
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
I added a change in the last PR how activations are quantized.
It looked like it is working and slightly improving performance.
But I now hit an edge case where I get gibberish that goes away if
I remove the change. I absolutely don't see what goes wrong, so
leaving the change in commented out for now.
This allows us to optimize TG performance for GQA models.
E.g., for IQ4_XS L3-8B with 8k TG-64 goes from 8.6 to 10.26 t/s.
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding support for K head size != V head size
This is relevant for DeepSeek models.
At this point ggml CPU FA works.
Now I need to go and change iqk FA to make it work
with Dk != Dv.
* iqk support for K head size != V head size
To not have compilation time explode, just
Dk = 192, Dv = 128 for now (DeepSeek)
* FA: very slightly faster for nq = 1 (TG)
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Deepseek MLA Optimizations
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* Make MLA optional
* Remove some unnecessary copies in the MLA attention
* Deepseek MLA Optimizations V2 (#195)
* Avoid allocating MHA KV cache when MLA is turned on
* Added missing gguf-py file
* Added final optimizations
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* Make sure we do have wk_b and wv_b before enabling MLA
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Use type_k and type_v to set the types of the MLA caches
They were hard-coded at f16.
On my Ryzen-7950X with native bf16 support I get a fairly
significant PP performance boost with bf16 KV-cache:
PP-4096 = 320 t/s up from 292 t/s with fp16 KV-cache.
* Better gemm strategy when nth > nhead
It gives a ~10% PP performance boost for DeepSeek-Lite with 32 threads
(with or without MLA).
Before this commit, when nth > nhead heads were processed
sequentially with all nth threads participating in each
matrix multiplication. Now we ind the gcd of nhead and
nth and split threads into nth/gcd groups, each group
processing nhead/gcd heads.
---------
Co-authored-by: Saood Karim <saood05@gmail.com>
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
Similar to the CUDA situation.
It is OFF by default.
If OFF, only F16, Q8_0, Q6_0, and, if the CPU provides native
BF16 support, BF16 FA kernels will be included.
To enable all, cmake -DGGML_IQK_FA_ALL_QUANTS=1 ...
This cuts compilation time for iqk_mul_mat.cpp by almost half
(45 seconds vs 81 seconds on my Ryzen-7950X).
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq1_s_r4: Use Q8_K_128 instead of Q8_1_X4 for gemm (AVX2/Zen4)
* iq1_m_r4: Use Q8_K_128 instead of Q8_1_X4 for gemm (AVX2/Zen4)
* iq1_s_r4: Use Q8_K_128 instead of Q8_1_X4 for gemm (Neon)
* iq1_m_r4: Use Q8_K_128 instead of Q8_0_X4 for gemm (Neon)
* Simdify q8_K128 quantization also on Neon
* Cleanup
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Revert "Do not quantize activations if not necessary (#79)"
This reverts commit 0bf4d99774aa3b6d00ef564acbc4dc211e45db33.
* Fixed compilation after revert
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Rename q4_0_r4 to q4_0_r8 to reflect actual row interleaving
* Rename q8_0_r4 to q8_0_r8 to reflect actual row interleaving
* Rename iq4_xs_r4 to iq4_xs_r8 to reflect actual row interleaving
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq1_m_r4: basics (quantize/dequantize)
* iq1_m_r4: Zen4 gemm
* iq1_m_r4: neon gemm
* iq1_m_r4: switch to q8_0_x4 also on AVX2/Zen4
With the deltas being per group of 8, we cannot make use
of the q8 sums stored in q8_1, so we get a tiny gain by
using q8_0_x4.
* iq1_m_r4: rename mul_mat_iq1_m_r4_q8_1 to mul_mat_iq1_m_r4_q8_0
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq1_s_r4: basics - quantize/dequantize
* iq1_s_r4: gemm/gemv works on AVX2/Zen4
* Don't forget to make sure we have a multiple of 4 rows per thread
* iq1_s_r4: this is better
* iq1_s_r4: fix Zen4 after AVX2 changes
* iq1_s_r4: NEON gemm/gemv
* iq1_s_r4: more bits for shared experts
With this mix we arrive at PPL(512) = 9.4140
for Deepseek-Lite using 1.766 bpw for the repeating layers.
On the Ryzen-7950X we get PP-512 = 494 t/s and
TG-128 = 52 t/s @ 16 threads.
* Forgotten counter increment
* iq1_s_r4: slightly faster AVX2/Zen4 gemm/gemv
* Compiler warnings
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Quantization mixes tweaks
* Make iq4_nl_r4 work with row size that are not a multiple of 128
... on Zen4
* Make iq4_nl_r4 work with row size that are not a multiple of 128
... on AVX2
* Make iq4_nl_r4 work with row size that are not a multiple of 128
... on AVX2
* Make q6_0_w4 work with row size that are not a multiple of 128
... on Zen4
* Make q6_0_w4 work with row size that are not a multiple of 128
... on Zen4
* Make q5_0_r4 work with row size that are not a multiple of 128
... on Zen4 and AVX2
* Make q5,6_0_r4, iq4_nl_e4 work with row size that are not a multiple of 128
also on NEON.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Slightly faster AVX2 implementation for q4_k_r4
* Even better AVX2 implementation for q4_k_r4
We now arrive at PP-512 = 328 t/s for LLaMA-3.1-8B on a
Ryzen-5975WX CPU, up from 291 t/s when I last measured
on 3c5f8722.
With FA and Q8_0 K-cache we get to 339.5 t/s.
* Fix llama-bench labels that I broke with #181
* Faster AVX2 implementation for q5_k_q4
We arrive at 302 t/s for LLaMA-3.1-8B on a Ryzen-5975WX CPU,
up from 273 t/s.
* Use AVX2 implementation of q4_k_r4 and q5_k_r4 also on Zen4
After the changes I made to AVX2, it ends up being slightly faster
compared to what I had for Zen4.
* Minor tweak
* Cleanup
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding gp option to llama-bench
Similar to pg, but it only looks at TG speed with a given
prompt length.
* Make q8_0_r4 work with tensor row sizes that are not a multiple of 128
They still need to be divisible by 32.
* Make q8_0_r4 work with tensor row sizes that are not a multiple of 128
.. on NEON
* Make q8_0_r4 work with tensor row sizes that are not a multiple of 128
.., on AVX2
* Make q4_0_r4 work with tensor row sizes that are not a multiple of 128
.., on AVX2
* Make q4_0_r4 work with tensor row sizes that are not a multiple of 128
... on NEON
* Make q4_0_r4 work with tensor row sizes that are not a multiple of 128
... on Zen4.
Also fix q8_0 K-cache for head sizes that are not multiple of 128.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Try interleaving 8 rows for iq4_xs
On Zen4, PP-512 goes up from ~260 t/s to 288 t/s for L3-8B.
TG-128 reaches max. performance at 2 threads and is slightly
higher than 4 interleaved rows (14.48 t/s vs 13.11 t/s @ 2 threads
and 14/28 t/s @ 4 threads).
* Try interleaving 8 iq4_xs rows
It is also faster on AVX2.
This is the NEON implementation. It is tiny bit faster than
4 interleaved rows (~0.5%).
So, this looks like a winner given the Zen4/AVX2 improvement
without associated NEON egression.
* Cleanup
* 8-rows interleaved q8_0 (AVX2)
* 8-rows interleaved q8_0 (Zen4)
* 8-rows interleaved q8_0 (Zen4) - slightly better
PP-512 is now 284 t/s compared to 257 t/s for 4-rows interleaved.
TG-128 reaches peak of 8.16 t/s at just 2 threads compared
to 7.95 t/s @ 4 threads before.
* 8-rows interleaved q8_0 (NEON)
PP-512 is slightly better (138 t/s vs 132.5 t/s), TG-128 is about the
same.
* FA: repack Q8_0 to Q8_0_R8
* Remove special purpose mul_mat_q8_0_r4_q8_1_128 (Zen4)
* FA: repack Q8_0 to Q8_0_R8 (NEON)
Very slightly faster than the general purpose gemm, slightly
slower than the D = 128 special case gemm mul_mat_q8_0_r4_q8_0_128.
Still removing mul_mat_q8_0_r4_q8_0_128 as we simply don't have
enough vector registers to hold 8 interleaved rows, so there is
no point to have the special purpose implementation.
* q4_0_r8 (AVX2)
* q4_0_r8 (NEON)
Tiny bit faster PP (~128 vs ~126 t/s), same TG.
* q4_0_r8 (Zen4)
Somehow only marginally faster?
268 t/s vs 261 t/s
* q4_0_r8 (Zen4) - slightly better
282 t/s for a pure q4_0 L3-8B quantization.
* Apply platform specific modifications when repacking
E.g., on NEON it is useful to pre-apply q ^ 0x88 to q4_0.
This results in a ~3% performance improvement.
Hence,
* Changed the signature of the repack_X functions to take a
bool argument indicating if the repacking is done online and,
if so, apply modifications as appropriate while repacking.
* Added iqk_modify_tensor to apply modifications to models that
have already been repacked while loading the model. Caveat:
just like rtr, this needs to have mmap disabled (else one would
need to move the data to a not mmap-ed buffer, so much more
complicated).
* Apply platform specific modifications when repacking
On Zen4 we can pre-convert the signed quants in q8_0_r4 and
q8_k_r8 to unsigned thus avoiding these operations in matrix
multiplications. With this change we hit
PP-512 = 382.40 t/s (q8_k_r8)
PP-512 = 306.92 t/s (q8_0_r4)
for L3-8B on a Ryzen-7950X using q8_0 KV-cache.
* Process up to 16 columns per kernel call for q8_k_r8
This brings PP-512 up to 389 t/s.
* Be able to load Deepseek-v2-Lite
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Try interleaving 8 rows for iq4_xs
On Zen4, PP-512 goes up from ~260 t/s to 288 t/s for L3-8B.
TG-128 reaches max. performance at 2 threads and is slightly
higher than 4 interleaved rows (14.48 t/s vs 13.11 t/s @ 2 threads
and 14/28 t/s @ 4 threads).
* Try interleaving 8 iq4_xs rows
It is also faster on AVX2.
This is the NEON implementation. It is tiny bit faster than
4 interleaved rows (~0.5%).
So, this looks like a winner given the Zen4/AVX2 improvement
without associated NEON egression.
* Cleanup
* 8-rows interleaved q8_0 (AVX2)
* 8-rows interleaved q8_0 (Zen4)
* 8-rows interleaved q8_0 (Zen4) - slightly better
PP-512 is now 284 t/s compared to 257 t/s for 4-rows interleaved.
TG-128 reaches peak of 8.16 t/s at just 2 threads compared
to 7.95 t/s @ 4 threads before.
* 8-rows interleaved q8_0 (NEON)
PP-512 is slightly better (138 t/s vs 132.5 t/s), TG-128 is about the
same.
* FA: repack Q8_0 to Q8_0_R8
* Remove special purpose mul_mat_q8_0_r4_q8_1_128 (Zen4)
* FA: repack Q8_0 to Q8_0_R8 (NEON)
Very slightly faster than the general purpose gemm, slightly
slower than the D = 128 special case gemm mul_mat_q8_0_r4_q8_0_128.
Still removing mul_mat_q8_0_r4_q8_0_128 as we simply don't have
enough vector registers to hold 8 interleaved rows, so there is
no point to have the special purpose implementation.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding BF16 support for AVX2
PP performance is the same as fp16 (~153 t/s on Ryzen-5975WX),
but TG is quite a bit lower (3.65 t/s vs 4.72 t/s at 8 threads).
Why?
* Slightly faster fp16/bf16 gemv on AVX2
It still saturates at the same lower peformance for bf16
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
This massively improves performance. As this is opt-in, we do not worry
about possible precision loss in the f16 -> bf16 conversion.
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* FA: slightly faster V*softmax(K*Q)) on Zen4
* FA: it is also faster on AVX2 and ARM_NEON
* Deleted forgotten commented out code
* FA: slightly faster V*softmax(K*Q)) also for fp16 K-cache
* FA: slightly faster V*softmax(K*Q)) on Zen4
We now get 130.9 t/s for a context of 32k tokens.
* FA: don't store sum scaling factor in SIMD registers
* FA: timing
* FA: faster q8_0 cache via run-time-repacking
On Zen4 q8_0 KV-cache now slightly outperforms BF16.
We get 134 t/s for 32k tokens, which is ~30% better than
the main branch, and ~18% better than the last commit.
We simply repack the K-cache to q8_0_r4 before the K*Q
multiplication and use the q8_0_r4 x q8_0_x4 matrix multiplication
template.
* FA: Fix AVX2
* FA: fix ARN_NEON
* FA: vectorize q8_0 -> q8_0_r4 repacking also on NEON
* FA: dedicated mat mul for D = 128 also for ARM_NEON
* FA: turn off performance timer
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Slightly faster FA for bf16 KV cache
~2-3% sort of thing. Sadly, when we go beyond 8k tokens, the
advantage kind of goes away.
* Slightly faster FA for Q8_0 KV cache
* FA: allow bf16 for V-cache with any supported K-cache
E.g., -ctk q8_0 -ctv bf16 is slightly faster than
-ctk q8_0 -ctv q8_0 on Zen4 for not too long context lengths
(say, <= 4096).
* FA: much better bf16 kv-cache speed for large contexts
We now hit 122 t/s for LLaMA-3.1-8B (quantized as iq4_xs and
run-time-repacked) with a context of 32768. IIRC, the previous
best for such large context was ~90 t/s.
Non-negligible improvement at 16384 and 8192 as well:
173.4 and 214 t/s.
* FA: slightly better quantized kv-cache speed for large contexts
E.g., for q8_0 and context of 32768, we are now at 113 t/s
for LLaMA-3.1-8B.
Also simplified the quantized K*Q multiplication.
* Fix q8_0 KV cache when not using FA - WIP (AVX2)
1. We add new types GGML_TYPE_Q8_0_X4 and GGML_TYPE_Q8_1_X4, and use
those to quantize activations for quants that use Q8_0 or Q8_1
as their vec_dot type.
2. We revert the changes to quantize_row_q8_0 and quantize_row_q8_1
3. We use GGML_TYPE_Q8_0_X4 and GGML_TYPE_Q8_1_X4 as the vec_dot type
4. We change the FA implementation to use GGML_TYPE_Q8_0 rather than
GGML_TYPE_Q8_0_X4 as the K and V types
5. We change the expected type to GGML_TYPE_Q8_0_X4/GGML_TYPE_Q8_1_X4
in iqk_mul_mat
Also added an optimization in ggml_compute_forward_mul_mat when
ne12*ne13 > 1 (K*Q and V*softmax(K*Q)) to process
n12*ne13/GCD(n12*ne13, nthread) threads simultaneously using
nthread/GCD(n12*ne13, nthread) threads per head. This results in
a non-negligible performance gain for large contexts.
Question: why is it not allowed to use quantized V-cache when
not using FA?
* Fix q8_0 KV cache when not using FA - NEON
* Fix AVX2
Again the issue with _mm256_maddubs_epi16 overflowing that I
keep forgetting.
* FA: don't use large Q steps on AVX2 for fp16 K-cache
* On Zen4 it is also better to not use large Q steps for fp16 K-cache
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Fix bug in iqk_mul_mat
I recently added the possibility to have a matrix multiplication
kernel that processes 16 columns in the right matrix per iteration.
This introduced a bug that shows up when batch size is greater
than 16, is not a multiple of 16, and the remainder is not a multiple
of the maximum columns being processed by the regular kernels
(and so, never showed up in my testing using TG-128 and PP-512).
This commit fixes the issue.
* Make sure rows per thread is a multiple of 4 also for MoE when using _r4 quants
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Add Falcon3 pre-tokinizer (same as llama3)
* q8_k16: use integer arithmetic to sum row values
The existing implementation that just sums up the f32 quantizations
works fine for the original BitNet models and also for the TriLM
ternary models. But for Falcon3 I see a significant difference between
the CPU and the GPU perplexity. If I use the q8_K16 int8_t quants to sum
up the values in a row, then the CPU-GPU PPL difference becomes much
smaller, and we get a lower PPL than Microsoft BitNet, which claims
to be "losless".
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q4_0_r4(avx2): convert q8_1 scales with SIMD instrinsics
PP-512 goes to 283 t/s from 265 t/s
* qx_0_r4(AVX2): convert scales with SIMD instrinsics
Also fix q8_0_r4 to not overflow.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Add nrc_y = 16 implementation.
Here just iq2_s on Zen4. We get PP-512 go up to 169.5 t/s from
148.5 t/s. As we are sure that we will be multiplying with 16
columns, we can spend the time to add the mins and make the
iq2_s quants unsigned.
* nrc_y = 16: AVX2 iq2_s
We go from 176.8 to 203.3 t/s.
* nrc_y = 16: NEON iq2_s
We go from 50.4 to 62.3 t/s.
We didn't need to do anything other than to set func16 to
mul_mat_iq2_s_r4_q8_k<16>. Even though we absolutely don't have
so many vector registers for all accumulators, unpacking and preparing
the iq2_s quants is so expensive that we still gain ~23% in performance
by reusing the unpacked quants 16 times instead of just 8, despite
having to load/unload the accumulated results to/from the
available vector registers.
* nrc_y = 16: NEON iq2_xxs, iq2_xs, iq3_xxs
iq2_xxs: 76.34 -> 85.33 t/s
iq2_xs: 54.13 -> 67.99 t/s
iq3_xxs: 67.45 -> 73.56 t/s
* nrc_y = 16: AVX2 iq2_xxs, iq2_xs, iq3_xxs
iq2_xxs: 195.7 -> 221.8 t/s
iq2_xs : 192.6 -> 220.6 t/s
iq3_xxs: 184.4 -> 206.9 t/s
* r4_nrcy_16: iq3_k_r4, iq4_k_r4, iq4_ks_r4, iq5_k_r4
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq3_xxs_r4: 1st shot on Zen4
PP-512: 107 t/s -> 137 t/s
TG-128(1 thread): 2.64 t/s -> 3.44 t/s
* iq4_xxs_r4: WIP
* iq4_xxs_r4: 1st shot at AVX2
Note: there is a bug in the AVX2 implementation for nrc_y = 1
for IQ quants with blocks of 32. I have fixed it for now by
using the nrc_y > 1 implementation (which works) also for nrc_y = 1.
* iq3_xxs_r4: NEON
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq5_k_r4: Zen4
Much slower than the others.
* iq5_k_r5: WIP
* Minor
* iq5_k_r4: fix AVX2 nrc_y = 1 case
* iq5_k_r4: better Zen4
But TG is still slower than iq5_k
* iq5_k_r4: slightly better AVX2
* iq5_k_r4: NEON
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Slightly better matrix x vector on Zen4/AVX2 for iq2_k_r4, iq3_k_r4, iq4_k_r4
More importantly: simplify.
* Minor
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Be able to repack tensors at run time
* Repack: also add bf16 as repackable type
* Repack: make sure number of rows is a multiple of the packing
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Not working bf16_r4
* Adding bf16_r8
Small performance gain compared to bf16 - 258 t/s vs 234 t/s.
I guess, this is still sub-obtimal.
* bf16_rx: Very slightly faster by interleaving 16 rows
258 t/s -> 263 t/s
* Rename bf16_r4 to bf16_r16
We are interleaving 16 rows now.
* Cleanup unused stuff
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q8_k_r8: fastest matrix multiplication known to human kind
We get PP-512(LLaMA-3.1-8B) = 370 t/s on a Ryzen-7950X!
* q8_k_r8: AVX2
I was worried that we don't have enough vector registrers on
AVX2, but it looks like it handles it just fine. We get
PP-512(LLaMA-3.1-8B) = 354 t/s on a Ryzen-5975WX.
Slightly slower than the Zen4 version with double the threads,
but still a huge upgrade compared to Q8_0_R4.
* q8_k_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 159.2 t/s.
Compare this to the 128 t/s we have fr Q8_0_R4.
* q8_k_r4: go to signed ints
Why?
* On AVX2 _mm256_maddubs_epi16() may overflow, so we need to
stay within the signed int range and use _mm256_sign_epi8.
Not yet tested on the AVX2 comp, vut expect major slowdown.
* It is almost 10% faster on ARM_NEON. Somehow the veorrq_u8()
needed tto convert from unsigned to signed seems to be extremely
slow on the M2-Max
* We only lose ~0.5% in oerformance on Zen4 (there the exclusive
or that we now use to convert fro signed to unsigned seems to be
much faster than on M2-Max)
* Shutup useless compiler warnings
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq4_k_r4: WIP
* iq4_k_r4: Zen4 and hopefully AVX2
On Zen4 we get PP-512(LLaMA-3.1-8B) = 232.6 t/s, up from 182.2 t/s
for iq4_k. Applying the extra shift costs a ~6 performance penalty.
* iq4_k_r4: AVX2
PP-512 = 227.60 t/s. The shifts are really costly.
* iq4_k_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 108 t/s, up from 58.2 t/s for iq4_k.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q2_k_r4: Zen4
PP-512(LLaMA-3.1-8B) = 256 t/s
* q3_k_r4: AVX2
* q2_k_r4: AVX2
We get PP-512(LLaMA-3.1-8B) = 287 t/s.
Also cherry-picked the q3_k_r4 AVX2 adaptation that I somehow
forgot to push upstream.
* q2_k_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 106.2 t/s.
TG-128 is 36.02 t/s, which is ~10% higher than q2_K_S.
* Make sure rows per thread are a multiple of 4
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q6_k_r4: Better ARM implementation
PP-512(LLaMA-3.1-8B) is now 104.2 t/s up from 83.2 t/s.
I.e., q6_k_r4 now beats q6_0_r4.
* q5_k_r4: Better ARM implementation
PP-512(LLaMA-3.1-8B) is now 107.8 t/s up from 96.9 t/s.
I.e., q5_k_r4 now beats q5_0_r4.
* q4_k_r4: Better ARM implementation
PP-512(LLaMA-3.1-8B) is now 122.1 t/s up from 110 t/s.
I.e., q4_k_r4 is now (nearly) on par with q4_0_r4.
* iq4_xs_r4: Better ARM implementation
PP-512(LLaMA-3.1-8B) is now 131.3 t/s up from 115.8 t/s.
iq4_xs_r4 is now the prompt processing champion on ARM.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q3_k_r4: Zen4 works, but not as good as it should be
238 t/s, so sloghtly slower than q6_k_r4.
* q3_k_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 106.9 t/s.
This is 1.93X faster than q3_K_S!
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding q6_k_r4
* q6_k_r4: 1st functional AVX2 version
* q6_k_r4: AVX2 and simple Zen4
"Simple" as in processing 4 instead of 8 rows at once.
On Zen4 we get PP-512(LLaMA-3.1-8B) = 238.3 t/s vs
195.2 t/s for Q6_K. TG-128 @ 1 thread is 7.94 t/s
vs 5.38 t/s for Q6_K.
* q6_k_r4: 1st NEON version
PP-512(LLaMA-3.1-8B) = 78 t/s vs 57.6 t/s for q6_K.
TG-128 is slightly lower rthan q6_K for low number of threads,
becomes very slightly better at 8 threads.
* q6_k_r4: slightly faster NEON
PP-512(LLaMA-3.1-8B) = 83.25 t/s
* q6_k_r4: slightly faster Zen4
238.3 t/s -> 243.2 t/s
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Something is still wrong
* Simply don't see what is wrong
* q4_k_r4: finally works on Zen4
I had forgotten to prevent token_embd.weight being quantized
with q4_k_r4!
* q4_k_r4: AVX2
We get PP-512(LLaMA-3.1-8B) = 267 t/s on a Ryzen-5975WX.
This is ~30% better than Q4_K_S.
* q4_k_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 110 t/s.
Not quite as good as q4_0_r4, but still a massive
improvement compared to he 69 t/s for q4_K.
* q4_k_r4: slightly better AVX2
PP-512 goes from 267 t/s to 282 t/s on Ryzen-5975WX
* Minor
* Minor
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Faster iq4_xs_r4 on Zen4
The trick is to simply prepare the Q8 block sums for
blocks of 32 as floats. This brings PP-512 up to 254.6 t/s
from 224 t/s.
* Fix broken matrix x vector product on Zen4
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* q4_0_r4: 6% faster PP on NEON
* qx_0_r4_q8_0 template
Applied to q4_0_r4 and q5_0_r4. It makes q5_0_r4 PP
~7% faster.
* Apply qx_0_r4_q8_0 template also to q6_0_r4 and iq4_nl_x4
* Simplify
* Minor iq4_xs_r4 improvement on NEON
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding iq2_bn_r4
This Zen4-only implementation achieves PP-512 = 826 t/s (!!!)
for Bitnet-1.58b-3B, up from 620 t/s for iq2_bn.
* Make sure rows per thread are a multiple of the number of interleaved rows
With this I can run iq2_bn_r4 with 32 threads and this increases
PP-512 to 872 t/s.
* iq2_bn_r4: 1st shot at NEON
PP-512 is already faster than iq2_bn (284 t/s vs 246 t/s
for Bitnet-1.58b-3B). TG-128 is ~5% slower.
* iq2_bn_r4: NEON
PP-512 is now 296 t/s. TG-128 is ~20% faster than iq2_bn
for 1 thread, but saturates to about the same 93 t/s at
8 threads.
* iq2_bn_r4: Experimenting on NEON
The matrix x vvector multiplication is erratic.
iq2_bn_r4 is faster at 1, 2, and 4 threads, but
saturates to a lower t/s at 8 threads compared to
iq2_bn. iq2_bn actually manages 99 t/s at 8 threads
and not 93 as I wrore in the last commit. iq2_bn_r4
performance has huge fluctuations at 4 and 8 threads.
* Some cleanup
* iq2_bn_r4: AVX2
As expected, PP is slightly slower as we just don;t have
enough vector registers (690 vs 710 t/s). TG is slightly faster
(18.2 vs 16.7 t/s at 1 thread).
* iq2_bn_r4: use AVX2 implementation on Zen4 for matrix x vector
It is faster - we get 29.6 t/s at 1 thread vs 25.9 t/s for iq2_bn.
* iq2_bn_r4: simdify q8_K16 quantization (AVX2)
PP-512 becomes 834 t/s and TG-128 now saturates to the same
performance as iq2_bn for 4 threads.
* iq2_bn_r4: simdify q8_K16 quantization (NEON)
PP-512 is now 304.7 t/s, and TG-128 @ 8 threads
very slightly outperforms iq2_bn (100.7 t/s vs 99.6 t/s)
* iq2_bn_r4: fix AVX2 after breaking it two commits ago
* iq2_bn_r4: better AVX2
As we don't have enough vector registers on AVX2, it is better
to do two passes per row needing only half of the accumulator
registers that way.
With this, we now beat iq2_bn PP also on AVX2 by a small margin.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding iq4_xs_r4
This is a 1st working version on Zen4.
We get PP-512(LLaMA-3.1-8B) = 226 t/s, so 16% slower
than iq4_nl_x4.
* iq4_xs_r4: WIP
* iq4_xs_r4: Use AVX2 version for matrix x vector on Zen4
* iq4_xs_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 115.6 t/s on M2-Max,
up from 68.2 t/s for iq4_xs!
* DRY
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding q6_0_r4
We get PP-512(LLaMA-3.1-8B) = 257 t/s on a Ryzen-7950X.
* q6_0_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 95 t/s on M2-Max.
In terms of ops, q6_0_r4 is identical to q5_0_r4
except for loading the high bits being
vld1q_u8_x2 instead of vld1q_u8. It is strange that
this can make a 5% difference in performance, especially
considering that this is amortized (re-used) over 8 columns
in the right matrix. Or am I running out of vector registers?
* Fix AVX2
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding q5_0_r4
We get PP-512(LLaMA-3.1-8B) = 256.7 t/s on a Ryzen-7950X.
We even get TG-128 improvement to 11.7 t/s from 11.1 t/s.
* q5_0_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 99.6 t/s on M2-Max,
up from 71.0 t/s for Q5_0. The difference to mainline llama.cpp
is no longer funny: they get 26.5 t/s for Q5_0.
For TG, we are nor able to fully saturate memory bandwidth
and arrive at 22.1 t/s @ 8 threads. Mainline llama.cpp gets
20.6 t/s for Q5_0.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding q8_0_r4
We get PP-512(LLaMA-3.1-8B) = 268 t/s on a Ryzen-7950X compared
to 175.6 t/s for Q8_0.
* q8_0_r4: NEON
We get PP-512(LLaMA-3.1-8B) = 112.6 t/s on M2-Max.
* q8_0_r4: Zen4 matrix-vector specialization
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding iq4_0_r4 - q4_0 repacked
We get PP-512(LLaMA-3.1-8B) = 278 t/s on a Ryzen-7950X CPU,
so ~5-6% faster than iq4_nl_x4.
* q4_0_r4: NEON
Here we get 115.8 t/s, so also ~5% better than iq4_nl_x4.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adding iq4_nl_x4
Looks very promising - I get PP-512(LLaMA-3.1-8B) = 230 t/s
on the Ryzen-7950X! This is faster than any other quant and
~40% faster than iq4_nl.
* iq4_nl_x4: getting amazing
This Zen4 variant gets us to PP-512(LLaMA-3.1-8B) = 263 t/s!
* iq4_nl_x4: AVX2
Here we gain only 25% compared to iq4_nl
* iq4_nl_x4: NEON
On M2-Max we get PP-512(LLaMA-3.1-8B) = 109.7 t/s, up from
82.4 t/s for iq4_nl.
* iq4_nl_x4: minor NEON improvement and cleanup
This gets us to 110.3 t/s. In comparison,
IQ4_NL_4_4 in mainline llama.cpp achieves 92.3 t/s.
* iq4_nl_x4: NEON specialization for matrix x vector
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* multi_sdd: WIP
* multi_sdd: CPU works
* multi_add: CUDA
* multi_add: simplify
* multi_add: Metal
* Metal: speed up mul_mat_id
For the Granite-1B MoE model PP-512 goes from
156 t/s to 890 t/s, so nearly a 6X speedup!
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* iq1_bn: improve CUDA TG
On RTX-3080 TG-128(Bitnet-1.58b-3B) goes from 318 t/s to 340 t/s.
I see I have on the front page 301 t/s, so pretty nice improvement
since then.
* iq2_bn(CUDA): quants are not 4-byte aligned
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Adapting iq2_bn to work without separate scale tensors
Why? It is becoming burdensome to maintain the special Bitnet
conversion in convert_hf_to_gguf.py, so I thnk it is better
to make iq1_bn and iq2_bn just work with the mainline
conversion script (which does not generate scales).
* Adapting iq1_bn to work without separate scale tensors
* Adapting iq2_bn: CUDA dequantize
* Adapting iq2_bn: CUDA works
* Adapting iq1_bn: CUDA works
* Adapting iq1_bn, iq2_bn: NEON
* Adapting iq1_bn, iq2_bn: Metal
Dequantize works, but there is still something wrong
with the dot products.
* WIP
Absoolutely don't see what is wrong with the iq1_bn and iq2_bn
vector dot product kernels.
* Remove iq1_tn and iq2_tn - Part 1
Now that iq1_bn and iq2_bn have per row scales, there is no
reason to also have iq1_tn and iq2_tn.
* Remove iq1_tn and iq2_tn - Part 2
* Bitnet: use the standard llm_build_kv to build self attention
My main motivation was to enable FA. But FA does not work anyway
because head size is 100 for the Botnet ternary models
(and I had forgotten this little detail).
* Revert "Avoid rebuild of GGML graph for each token (#98)"
This reverts commit f2d315b46f7aacc7df4b86bd8acba387b30e11ca.
As far as I can tell, the commit breaks Metal TG.
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Added Johannes' changes, still getting NaNs with quantized k-cache.
Also getting NaN's on Johannes's mainline branch.
* This fixes it
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
* Enable IQ4_NL for V-cache in token generation
* We don't need these
* Update printour of allowed quantized KV-cache combinations
* Add IQ4_NL + IQ4_NL to FA
This is a better alternative than Q4_0 + Q4_0 for the VRAM poor.
* Remove file added by mistake
* Fix typo, which is not really a bug
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
Introduces caching of GGML graph to avoid unnecessary full rebuild between each token.
KV cache parameters, which change with each token, are updated directly in cached GGML
graph. Can be disabled with GGML_DISABLE_GRAPH_CACHING environment variable.
Kawrakow
Nexes the Elder
agray3